How To Install Blinds
If you are looking for information on how to install blinds, it is best to start by measuring the inside mount or the window at the sides, top and bottom. Then you need to measure the outside mount at the same places and include the two sides of the castings of the window. Accurate measurements are essential for proper installation of the blinds.
After careful measurements, before installation of the blinds, you need to install the mounting brackets are essential, as they will hold the blinds in place mark the places to be drilled with pencil. Secure the screws in place to install the bracket and install the other bracket the same way.
Next on your quest on how to install blinds you need to affix the blinds in the brackets and then install the brackets on the head rail. Read the manufacturers instructions and lock the rails in place. If you have a valance for the blinds, you need to install them place. Line up the ends of the valance and cut off the loose ends and install it on the head rail.
To give it a final touch and double check on securing it firmly with hold down clips. Mark and fix in the screws at each mark and fasten the clips in line at desired lengths. Your blinds are ready to be used!
How To Install Blinds On a Metal Door
If you are looking to install blinds on metal door, it just needs attention to a few details. From installing wood blinds to vinyl blinds, you have a choice in purchasing the blinds of your choice. You need to buy the blinds that would fit the metal door size or if you have some blinds that are of a greater length, cut them to size.
Mark the points on door where the blind brackets need to be hanged. Level the marks before you drill in and then using a drill and self-tapping screws, attach the brackets onto the door. The brackets will be installed snugly on the metal door.
Then you can slide the blinds within the brackets and install the retainers by either sliding them in or in some cases, they come inbuilt with the brackets. Try and see if the blinds are working properly and then attach the valance. You can use the manufacturer’s instructions for installing the valance and the accompanied hardware. How to install blinds is not a difficult task if you’ll remember to follow the simple tips mentioned above.
Related posts:
Tagged: how to install blinds, how to install blinds on a metal door, Shutters and Blinds, valance, vinyl blinds, wood blinds
Got something to say? Click here to reply
